/
CMC Z1 Support Documentation

CMC Z1 Support Documentation

Owned by dani.simmonds
Last updated: Oct 09, 2024
3 min read

  • The CMC Z1 was introduced in June 2020.

  • Width: 72.5" 

  • Height: 52.5"

  • Weight: 135 lbs

  • Recommended work space: 80"W x 65"H

  • Air compressor required must supply 1cfm or greater.

  • Driver Pack/ECU: 120-240VAC  250W max.

  • Select the desired topic from the CMC model Z1 support documentation listed below.

CMCZ1BoardUP2024800.png
CMC Z1

Wizard CMC Z1 Overview

Wizard CMC Z1 Overview

How a Wizard CMC Can Help Your Business: Video

Design Examples Cut on a Wizard CMC: Video

Wizard CMC Z1 Overview: Video

Board

Board

CMC Model Cutting Information

Board Z1: CMC Z1 Components Labeled

Board Z1: Control Panel Buttons

Board Z1: Control Panel: Mat Clamp Pressure Adjustment

Board: Drive Belt Documents

Board: Drive Belt Documents

Board Z1: Drive Belt Position Alignment

Board Z1: Drive Belt Position Fine-Tune

Board Z1: Drive Belt Replacement

Board: Emergency Stop Button

Board: Emergency Stop Button

Board Z1: Emergency Stop Button

Board: Finger Clamps for Zero Waste

Board: Finger Clamps for Zero Waste

Board Z1: Finger Clamps for Zero Waste

Board: Horizontal Belt: Adjust Horizontal Belt Tension

Board: Horizontal Belt: Adjust Horizontal Belt Tension

Board Z1: Horizontal Belt: Adjust Horizontal Belt Tension

Board: Maintenance: Recommended Maintenance

Board: Maintenance: Recommended Maintenance

Board Z1: Maintenance: Recommended Maintenance

Board Mat Alignment Plate Documents

Board Mat Alignment Plate Documents

Board Z1: Mat Alignment Plate Installation

Board Z1: Mat Alignment Plate Usage

Board: Magnetic Stop Plate Installation

Board: Magnetic Stop Plate Installation

Board Z1: Magnetic Stop Plate Installation

Cartridges: Blades: Changing the Blade Documents

Cartridges: Blades: Changing the Blade Documents

Cartridges Z1: Blades: Blade and Cartridge Identification

Cartridges Z1: Blades: Change the 45 Degree Blade

Cartridges Z1: Blades: Change the 45 Degree Plus Blade

Cartridges Z1: Blades: Change the 45 Degree Front Blade.

Cartridges Z1: Blades: Change the 52 Degree Blade

Cartridges Z1: Blades: Change the 90 Degree Blade

Cartridges Z1: Blades: Change the Vinyl Cartridge Blade

Cartridges: Changing the Cartridges Documents

Cartridges: Changing the Cartridges Documents

Cartridges Z1: Change to the 45 Degree Cartridge

Cartridges Z1: Change to the 45 Plus Degree Cartridge

Cartridges Z1: Change to the 52 Degree Cartridge

Cartridges Z1: Change to the 90 Degree Cartridge

Cartridges Z1: Change to the Deboss Cartridge

Cartridges Z1: Change to the Pen Cartridge

Cartridges Z1: Pen Tool: Installing the Pen Cartridge: Video

Cartridges Z1: Pen Tool Demonstration: Video

Cartridges Z1: Change to the Vinyl Cartridge

Cartridges Z1: Vinyl Tool Demonstration Video

Cartridges Z1: Change to the Crease Cartridge

ECU Documents

ECU Documents

ECU Z1: No Power Available to the ECU

ECU Z1: Could Not Find Compatible Hardware

ECU Z1: ECU Drivers Install

ECU Z1: ECU Drivers Uninstall

ECU Z1: ECU Ferrite Attachment Installation

ECU Z1: ECU Hardware Install

ECU Z1: ECU Turning Off and On Specifics

ECU Z1: ECU USB HUB for Improved Connection Performance

Gantry Documents

Gantry Documents

Gantry Z1: Air Valve Assembly Replacement

Gantry Z1: Air Valve Assembly Replacement Video

Gantry Z1: Air Valve Assembly Test Buttons

Gantry Z Remove Gantry Shipping Lock Screws

Gantry Replacement: CMC Z1

Gantry Z1: Vertical Belt: Adjust Gantry Vertical Belt Tension

Gantry Z1: Vertical Belt: Lubrication Instructions

Gantry Z1: Vertical Belt: Replacement Instructions for Gantry Vertical Belt Pulley

Gantry Z1: Replacing Gantry Vertical Belt Pulley

Getting Started

Getting Started

Getting Started Manual CMC Z1

Head Documents

Head Documents

Head Z1: Align the Head

Head Z1: Measuring the Blade Depth

Head Z1: Footblock Cleaning and Lubrication

Head Z1: Footblock Replacement Instructions

Head Z1: Head Assembly Power Cable Strain Relief Installation

Head Z1 Replacement

Head Z1 Wheel Adjustment

Head Z1 Variable Pressure Optimization (VPO) Documents

Head Z1 Variable Pressure Optimization (VPO): Adjustment Instructions

Head Z1 VPO: Cutting a Dense Layer

Head Z1 VPO: Cutting an Extra Dense Layer with the 90° Cartridge

Head Z1 VPO: Cutting a Typical Matboard

Parts Return Packaging Documentation

Parts Return Packaging Documentation

Parts Return Packaging: Assembling the CMC Shipping Box

Parts Return Packaging: Customer Repackaging Instructions for Moving the CMC

Parts Return Packaging: Upgrade/Termination Hardware Return Instructions

Packaging Gantry and Head to Ship Back to Wizard

CMC Stand Documents

CMC Stand Documents

Fixed Wall Mount Instructions

Floor Stand Assembly Instructions

 

Related content

CMC 9000 Support Documentation
CMC 9000 Support Documentation
Knowledge Base
More like this
More Information
More Information
Knowledge Base
Read with this
CMC 8500eSBT Support Documentation
CMC 8500eSBT Support Documentation
Knowledge Base
More like this
Template Library
Template Library
FrameShop 7x
Read with this
CMC 8000RC Support Documentation
CMC 8000RC Support Documentation
Knowledge Base
More like this
CMC 8000 Support Documentation
CMC 8000 Support Documentation
Knowledge Base
Read with this