Align the Head: All Current CMC Models

Click the Align the Head button to Align the Head into the cutting position and power up the motors in preparation of cutting a mat.

Aligning the Head will only get the machine ready to cut, but not actually cut.

Optionally, if you click the Cut button when the motors are disengaged, it will prompt you to Align the Head.

After the Head is Aligned, it will then Cut the mat.

Select the model below for specific instructions.

• Aligning the Head on the CMC Z1

• Aligning the Head on the CMC Z(9000z)

• Aligning the Head on the CMC 9000

• Aligning the Head on the CMC 8500 and 8000 Series