Click here to check out our new How To section

Align the Head CMC Z1

Owned by dani.simmonds
Last updated: Nov 01, 2024
4 min read

Align the Head Button on the CMC Z1

Align the Head Button on the CMC Z1

  • Click the Align the Head button to Align the Head into the cutting position and power up the motors in preparation of cutting a mat.

  • Aligning the Head will get the machine ready to cut, but not actually cut.

  • You will need to click the Cut Button to cut the design.

  • NOTE: The hardware photos below may slightly differ from your specific model but the steps are still the same.

Click the Align the Head Button to Align the Head in Preparations of Cutting

Align the Head Button vs. the Cut Button

CutScreenCutAlignHeadMiniZ1-70800.png
Click Align the Head or Click Cut if the Head is Not Aligned to Align the Head and Cut the Mat

Aligning the Head on the CMC Z1 When Motors are Disengaged

Aligning the Head on the CMC Z1 When Motors are Disengaged

Related Links

Related Links