Use the Disengage button to cut the power to the motors of the cutting Head.
For Additional Information:
Click Options > Reset Motors on the Main Screen to Disengage the Motors.
See Align the Head for information on Aligning the Head after the motors are disengaged.
Click the Disengage button to disengage power to the motors of the cutting Head on the CMC.
User will be prompted to Click OK to release the motors.
Grasp the Head and then Click OK.
The motors will be disengaged and the Head will drop. When the motors are disengaged, the Head and the Gantry can be moved freely by hand.
The Head will need to be Aligned again before the next mat is cut.
