Gantry Replacement: CMC Z1

Owned by dani.simmonds
Last updated: Oct 09, 2024
17 min read

Head Removal

Head Removal

  • Click Reset Motors Button on the Cut Preview and click OK on the release motors prompt.

Click the Reset Motors Button

  • Turn off the ECU.

  • Turn off the air.

Turn off the ECU

  • Push Blade Cartridge release down to eject the Blade Cartridge.

Gantry Removal

Gantry Removal

Disconnect Gantry

Removing the Drive Belt from the Rail

Removing the Drive Belt from the Rail

Remove Stop Plate

 

Remove Stop Plate

 

 

Slide the Gantry Off of the Board

Slide the Gantry Off of the Board

 

Gantry Installation

Gantry Installation

Installing the Stop Plate

Installing the Stop Plate

Installing the Drive Belt onto the Rail

Installing the Drive Belt onto the Rail

Hook Up the Gantry Board Cable Connections

Hook Up the Gantry Board Cable Connections

Connecting the Board Cable

 

Attaching Air Lines

Attaching Air Lines

Attach the M12 Cable to the Gantry

Attach the M12 Cable to the Gantry

 

Head Installation

Head Installation

Head Wheel Adjustment

Head Wheel Adjustment

Check the Gantry Wheels

Check the Gantry Wheels

Test Cut: Adjusting the Horizontal Home

Test Cut: Adjusting the Horizontal Home

Confirm that the the Gantry is Straight

Confirm that the the Gantry is Straight