CMC Z(9000z) Support Documentation

Owned by dani.simmonds
Last updated: Oct 09, 2024
3 min read

  • The CMC Z(9000z) was introduced in October 2017.

  • Width: 72.5" 

  • Height: 52.5"

  • Weight: 135 lbs

  • Recommended work space: 80"W x 65"H

  • Air compressor required must supply 1cfm or greater.

  • Driver Pack/ECU: 120-240VAC  250W max.

  • Select the desired topic from the CMC model Z(9000z) support documentation listed below.

CMC9000ZBoardUP2024800.png
CMC Z(9000z)

Wizard CMC Z Overview

Wizard CMC Z Overview

How a Wizard CMC Can Help Your Business: Video

Design Examples Cut on a Wizard CMC: Video

Wizard CMC Z(9000z) Overview: Video

Board

Board

CMC Model Cutting Information

Board Z(9000z): CMC Components Labeled

Board Z(9000z): Control Panel Buttons

Board Z(9000z): Control Panel: Mat Clamp Pressure Adjustment

Board: Drive Belt Documents

Board: Drive Belt Documents

Board Z(9000z): Drive Belt Position Alignment

Board Z(9000z): Drive Belt Position Fine-Tune

Board Z(9000z): Drive Belt Replacement

Board: Emergency Stop Button

Board: Emergency Stop Button

Board Z(9000z): Emergency Stop Button

Board: Finger Clamps for Zero Waste

Board: Finger Clamps for Zero Waste

Board Z(9000z): Finger Clamps for Zero Waste

Board: Horizontal Belt: Adjust Horizontal Belt Tension

Board: Horizontal Belt: Adjust Horizontal Belt Tension

Board Z(9000z): Horizontal Belt: Adjust Horizontal Belt Tension

Board: Maintenance: Recommended Maintenance

Board: Maintenance: Recommended Maintenance

Board Z(9000z): Maintenance: Recommended Maintenance

Board Mat Alignment Plate Documents

Board Mat Alignment Plate Documents

Board Z(9000z): Mat Alignment Plate Installation

Board Z(9000z): Mat Alignment Plate Usage

Board: Magnetic Stop Plate Installation

Board: Magnetic Stop Plate Installation

Board Z(9000z): Magnetic Stop Plate Installation

Cartridges: Blades: Changing the Blade Documents

Cartridges: Blades: Changing the Blade Documents

Cartridges Z(9000z): Blades: Blade and Cartridge Identification

Cartridges Z(9000z): Blades: Change the 45 Degree Blade

Cartridges Z(9000z): Blades: Change the 45 Degree Plus Blade

Cartridges Z(9000z): Blades: Change the 52 Degree Blade

Cartridges Z(9000z): Blades: Change the 90 Degree Blade

Cartridges Z(9000z): Blades: Change the Vinyl Cartridge Blade

Cartridges: Changing the Cartridges Documents

Cartridges: Changing the Cartridges Documents

Cartridges Z(9000z): Change to the 45 Degree Cartridge

Cartridges Z(9000z): Change to the 45 Plus Degree Cartridge

Cartridges Z(9000z): Change to the 52 Degree Cartridge

Cartridges Z(9000z): Change to the 90 Degree Cartridge

Cartridges Z(9000z): Change to the Deboss Cartridge

Cartridges Z(9000z): Change to the Pen Cartridge

Cartridges Z(9000z): Pen Tool Demonstration: Video

Cartridges Z(9000z): Pen Tool: Installing the Pen Cartridge: Video

Cartridges Z(9000z): Change to the Vinyl Cartridge

Cartridges Z(9000z): Vinyl Tool Demonstration

Cartridges Z(9000z): Change to the Crease Cartridge

ECU Documents

ECU Documents

ECU/Driver Pack Types

ECU Z(9000z): No Power Available to the ECU

ECU Z(9000z): Could Not Find Compatible Hardware

ECU Z(9000z): ECU Drivers Install

ECU Z(9000z): ECU Drivers Uninstall

ECU Z(9000z): ECU Ferrite Attachment Installation

ECU Z(9000z): ECU Hardware Install

ECU Z(9000z): ECU Turning Off and On Specifics

ECU Z(9000z): ECU USB HUB for Improved Connection Performance

Gantry Documents

Gantry Documents

Gantry Z(9000z): Air Valve Assembly Replacement

Gantry Z(9000z): Air Valve Assembly Replacement Video

Gantry Z(9000z): Air Valve Assembly Test Buttons

Gantry Replacement: CMC Z(9000z)

Gantry Z(9000z): Vertical Belt: Adjust Gantry Vertical Belt Tension

Gantry Z(9000z): Vertical Belt: Lubrication Instructions

Gantry Z(9000z): Vertical Belt: Replacement Instructions for Gantry Vertical Belt Pulley

Gantry Z(9000z): Replacing Gantry Vertical Belt Pulley

Getting Started

Getting Started

Getting Started Manual CMC Z(9000z)

Head Documents

Head Documents

Head Z(9000z): Align the Head

Head Z(9000z): Blade Depth Dial Calibration

Head Z(9000z): Blade Depth Dial Calibration Video

Head Z(9000z): Measuring the Blade Depth

Head Z(9000z): Footblock Cleaning and Lubrication

Head Z(9000z): Footblock Glide Screw Adjustment

Head Z(9000z): Footblock Replacement Instructions

Head Z(9000z): Head Assembly Power Cable Strain Relief Installation

Head Z(9000z) Replacement

Head Z(9000z) Wheel Adjustment

Head Z(9000z) Wheel Adjustment Video

Head Z(9000z) Variable Pressure Optimization (VPO): Adjustment Instructions

Head Z(9000z) VPO: Cutting a Dense Layer

Head Z(9000z) VPO: Cutting an Extra Dense Layer with the 90° Cartridge

Head Z(9000z) VPO: Cutting a Typical Matboard

Parts Return Packaging Documentation

Parts Return Packaging Documentation

Parts Return Packaging: Assembling the CMC Shipping Box

Parts Return Packaging: Customer Repackaging Instructions for Moving the CMC

Parts Return Packaging: Upgrade/Termination Hardware Return Instructions

Packaging Gantry and Head to Ship Back to Wizard

CMC Stand Documents

CMC Stand Documents

Fixed Wall Mount Instructions

Floor Stand Assembly Instructions

Retractable Wall Mount (RWM)