This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Other Cartridge Adjustments: FrameShop Configurations Screen

Other Cartridge Adjustments

Other Cartridge Adjustments

The Other Cartridge Adjustments section contains additional configuration fields for V-Grooves and for the non-blade cartridges.

Other Cartridge Adjustments for V-Grooves and Non-Blade Cartridges

Select the Cartridge Adjustment to be Edited:

Select the Cartridge Adjustment to be Edited:

Width Adjustment (V-Groove)

Select this topic to see information on editing the V-Groove width if it is cutting too wide or too narrow.

Width Adjustment Adjusts the Width of the V-Groove

Outside Rotation (V-Groove) 

Select this topic to see information on editing for a Swoop or Flare on the Outside cut of a Non-Oval V-Groove.

Inside Rotation (V-Groove) 

Select this topic to see information on editing for a Swoop or Flare on the Inside cut of a Non-Oval V-Groove.

Outside Oval Rotation (V-Groove)  

Select this topic to see information on editing for a Bump or Feather on the Outside cut of an Oval V-Groove.

Inside Oval Rotation (V-Groove)  

Select this topic to see information on editing for a Bump or Feather on the Inside cut of an Oval V-Groove.

Horizontal Adjustment (Tool Specific) 

Select this topic to see information on editing the Horizontal placement for the Deboss, Pen or Vinyl tool.

Vertical Adjustment (Tool Specific) 

Select this topic to see information on editing the Vertical placement for the Deboss, Pen or Vinyl tool.

Depth Setting (Tool Specific) 

Select this topic to see information on selecting the optimum Blade Depth for the Deboss, Pen or Vinyl tool.

Corner Pause (ms) (Tool Specific)  

Select this topic to see information on editing the amount of time to Pause in the corners, in milliseconds, when applying the Deboss, Pen or Vinyl tool.

Overshoot (Tool Specific) 

Select this topic to see information on editing how much to Overshoot past the end of the segment for Deboss, Pen or Vinyl tool. This is similar to an Overcut.

Plunge (Tool Specific) 

Select this topic to see information on editing whether to Plunge or Unplunge between segments of an object when doing a Deboss, Pen or Vinyl object.

Install Pen  

Select this topic to see information on using the Install Pen utility to calibrate the system for different pens.