This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Depth Setting (Tool Specific): FrameShop Configurations Screen

Depth Setting

Depth Setting

Enter the optimum blade depth for the current non-blade tool (Deboss, Pen or Vinyl tool) in the Depth Setting field.  

Depth Setting Controls the Depth Setting for the Non-Blade Cartridges

Determining the Depth Setting

Determining the Depth Setting

Cut test mats with the Deboss, Pen or Vinyl tools. Once you are satisfied with the blade depth that gives the best effect without tearing the surface, enter that number in the Depth Setting field for that specific tool cartridge.

Repeat for each tool cartridge.

The next time when you use that cartridge, it will prompt you for the correct blade depth.

Deboss, Pen and Vinyl Cartridge Examples