This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Tool Configs: FrameShop Configuration Screen

Tool Configs

Tool Configs

The Tool Configs on the Configurations Screen displays the global settings for the bevel cartridge tabs. 

The Tool Configurations Section Adjusts the Global Configuration Settings

Horizontal 

Select this topic to see information on the Horizontal Home which defines the global horizontal placement of objects cut with the blade cartridges. 

For the Horizontal Home for non-blade cartridges, see Horizontal Adjustment.

Adjust the Horizontal Home if the Opening is Applied in the Wrong Place Horizontally

Vertical 

Select this topic to see information on the Vertical Home which defines the global vertical placement of objects cut with the blade cartridges. 

For the Vertical Home for non-blade cartridges, see Vertical Adjustment.

Depth Bias 

Select this topic to see information on the Depth Bias which is used to calculate the proper blade depth when a SKU has been selected.

Plunge Count 

Select this topic to see information on the Plunge Count, which is the number of plunges for this particular blade cartridge before pausing for a blade change.

Circle/Oval Rotation Button

Select this topic to see information on the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.