Inside Rotation (V-Groove): FrameShop Configurations Screen
V-Groove Inside Rotation | |
---|---|
Adjust the Inside Rotation if you are getting Swoops or Flares in the corners of a non-oval V-Groove. The Inside Rotation controls how much the foot block will rotate before cutting the outside of the V-Groove. The inside cuts of the V-Groove are Interior cuts, and cut into the V-Groove fallout and not the matboard. They cut on the first pass of the V-Groove, and are cut in a clockwise direction. If you have too little Inside Rotation on a non-oval V-Groove you will get a Swoop, too much rotation and you will get a Flare. | Inside Rotation Adjusts for Swoops or Flares in the Corners on the Inside Cut of a Non-Oval V-Groove |
V-Groove Inside has a Swoop | |
---|---|
The beginning of the inside cut of the V-Groove Swoops toward the non-oval V-Groove opening. | Inside V-Groove Cut Swoops on the Non-Oval V-Groove |
Increase the Inside Rotation. | |
The object will now cut correctly. | |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. |
V-Groove Inside has a Flare | |
---|---|
The beginning of the inside cut of the V-Groove Flares away from the non-oval V-Groove opening. | |
Decrease the Inside Rotation. | |
The object will now cut correctly. | |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. |
V-Groove Outside Rotation | |
---|---|
Select this topic to see information on the Outside Rotation (V-Groove) to adjust the rotation for the outside cut of the non-oval V-Groove. |