This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Thin Deboss Configurations: FrameShop Configurations Screen
- dani.simmonds
Deboss Thin Cartridge | |
|---|---|
The White Deboss Thin Cartridge presses a thin stylus into the matboard to create a subtle design. |  White Thin Deboss Opening and Cartridge |
Select the Deboss Thin Cartridge Type | |
|---|---|
Select the Deboss Tab on the Configurations screen.  Select the White - Thin cartridge from the Cartridge dropdown control. |  Select the Deboss Tab and Desired Cartridge |
Select the Area of Concern for Thin Deboss Below:Be sure to select the Deboss Thin from the Current Bevel Type dropdown control. |
|---|
This is viewed from the front of the mat. Select this topic to adjust the Horizontal Adjustment. | |
This is viewed from the front of the mat. Select this topic to adjust the Vertical Adjustment. | |
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. | |
Select this topic to adjust the Depth Setting. | |
Select this topic to adjust the Corner Pause. | |
This is viewed from the front of the mat. Select this topic to adjust the Overshoot. | |
This is viewed from the front of the mat. Select this topic to adjust the Overshoot. | |
Select this topic to adjust the Plunge between segments. | |
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. | |
Â