This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Medium Deboss Configurations: FrameShop Configurations Screen
- dani.simmonds
Deboss Medium Cartridge | |
|---|---|
The Red Deboss Medium Cartridge presses a medium stylus into the matboard to create a subtle design. |  Red Medium Deboss Opening and Cartridge |
Select the Deboss Medium Cartridge Type | |
|---|---|
Select the Deboss Tab on the Configurations screen. Select the Red - Medium cartridge from the Cartridge dropdown control. |  Select the Deboss Tab and Desired Cartridge |
Select the Area of Concern for Medium Deboss Below:Be sure to select the Deboss Medium from the Current Bevel Type dropdown control. |
|---|
This is viewed from the front of the mat. Select this topic to adjust the Horizontal Adjustment. |  Adjust the Horizontal Home if the Deboss Object is Applied in the Wrong Place Horizontally |
This is viewed from the front of the mat. Select this topic to adjust the Vertical Adjustment. |  Adjust the Vertical Home if the Deboss Object is Applied in the Wrong Place Vertically |
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. |  Adjust the Opening Adjustment if the Deboss is Applied at the Wrong Size |
Select this topic to adjust the Depth Setting. |  Adjust the Depth Setting for the Appropriate Blade Depth Setting for the Deboss Cartridge |
Select this topic to adjust the Corner Pause. |  Adjust the Corner Pause to Set How Long to Pause in the Corners When Applying the Deboss Cartridge |
This is viewed from the front of the mat. Select this topic to adjust the Overshoot. |  Decrease the Overshoot if the Deboss Distance Beyond the Corner is too Long |
This is viewed from the front of the mat. Select this topic to adjust the Overshoot. |  Increase the Overshoot if the Deboss Distance Beyond the Corner is too Short |
Select this topic to adjust the Plunge between segments. |  The Plunge Field Controls Whether to Keep the Deboss Cartridge Plunged in the Corners, or Whether to Retract and Replunge the Deboss into Each Corner |
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |  Click the Troubleshooting to Open the Troubleshooting Utility to Make Quick Configuration Edits to the Current Opening |