Thin Deboss Configurations: FrameShop Configurations Screen

Owned by dani.simmonds
Last updated: Jan 18, 2022
3 min read

Deboss Thin Cartridge

Deboss Thin Cartridge

The White Deboss Thin Cartridge presses a thin stylus into the matboard to create a subtle design.

White Thin Deboss Opening and Cartridge

Select the Deboss Thin Cartridge Type

Select the Deboss Thin Cartridge Type

Select the Deboss Tab on the Configurations screen.  

Select the White - Thin cartridge from the Cartridge dropdown control.

Select the Deboss Tab and Desired Cartridge

Select the Area of Concern for Thin Deboss Below:

Be sure to select the Deboss Thin from the Current Bevel Type dropdown control.

Select the Area of Concern for Thin Deboss Below:

Be sure to select the Deboss Thin from the Current Bevel Type dropdown control.

Deboss-Thin is Applied to the Wrong Place Horizontally 

Deboss-Thin is Applied to the Wrong Place Horizontally 

This is viewed from the front of the mat. Select this topic to adjust the Horizontal Adjustment.

Deboss-Thin is Applied to the Wrong Place Vertically 

Deboss-Thin is Applied to the Wrong Place Vertically 

This is viewed from the front of the mat. Select this topic to adjust the Vertical Adjustment.

Deboss-Thin is the Wrong Size

Deboss-Thin is the Wrong Size

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

Deboss-Thin Applied at the Wrong Depth

Deboss-Thin Applied at the Wrong Depth

Select this topic to adjust the Depth Setting.

Deboss-Thin Cartridge Tears the Mat 

Deboss-Thin Cartridge Tears the Mat 

Select this topic to adjust the Corner Pause. 

Deboss-Thin Lines are too Long

Deboss-Thin Lines are too Long

This is viewed from the front of the mat. Select this topic to adjust the Overshoot.

Deboss-Thin Lines are too Short 

Deboss-Thin Lines are too Short 

This is viewed from the front of the mat. Select this topic to adjust the Overshoot.

Deboss-Thin Set to Plunge Between Segments

Deboss-Thin Set to Plunge Between Segments

Select this topic to adjust the Plunge between segments.

Troubleshooting Button 

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

Â