/
Depth Setting (Tool Specific): FrameShop Configurations Screen
This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Depth Setting (Tool Specific): FrameShop Configurations Screen
- dani.simmonds
Owned by dani.simmonds
Determining the Depth Setting | |
|---|---|
Cut test mats with the Deboss, Pen or Vinyl tools. Once you are satisfied with the blade depth that gives the best effect without tearing the surface, enter that number in the Depth Setting field for that specific tool cartridge. Repeat for each tool cartridge. The next time when you use that cartridge, it will prompt you for the correct blade depth. |  Deboss, Pen and Vinyl Cartridge Examples |
, multiple selections available,
Related content
Enter the Deboss Depth Setting
Enter the Deboss Depth Setting
More like this
Blade Depth Button: FrameShop Cut Preview Screen
Blade Depth Button: FrameShop Cut Preview Screen
More like this
Depth Setting on Non-Blade Cartridges: Configurations Screen
Depth Setting on Non-Blade Cartridges: Configurations Screen
More like this
Blade Depth Entry: FrameShop Cut Preview Screen
Blade Depth Entry: FrameShop Cut Preview Screen
More like this
Depth Bias: FrameShop Configurations Screen
Depth Bias: FrameShop Configurations Screen
More like this
Changing the Blade Depth: FrameShop Cut Preview Screen
Changing the Blade Depth: FrameShop Cut Preview Screen
More like this