This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Depth Bias: FrameShop Configurations Screen
- dani.simmonds
Depth Bias | |
|---|---|
The Depth Bias is used to calculate the proper blade depth when the SKU selected for the matboard contains the matboard thickness. This will prompt for the correct blade depth when cutting the mat. |  The Depth Bias is Used to Calculate the Proper Blade Depth when the SKU Selected for the Matboard Contains the Matboard Thickness |
Depth Bias Formula |
|---|
The Depth Bias is used in conjunction with the Default Blade Depth for 4-ply. The formula is: [(Default Depth) - 10]For example, if the normal blade depth for 4-ply is 11, then 11-10=1, so enter 1 for the Depth Bias. |
Enter Depth Bias | |
|---|---|
Select the desired Blade Cartridge Type Tab. Determine what the normal blade depth is for this cartridge. Subtract 10 from your Default Blade Depth. This may be a negative number. Enter the number into the Depth Bias field for this cartridge. |  Depth Bias Calculates the Proper Blade Depth When the SKU is Selected for Matboard |