This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
45 Degree Plus Configurations: FrameShop Configurations Screen
45 Degree Plus Cartridge | |
---|---|
The 45 Degree Plus Cartridge cuts a 45° bevel into thicker matboard such as 8-ply. Older systems may have a yellow plastic 45°+ Cartridge. | 45°+ Degree Bevel Opening and Cartridges |
Select the 45 Degree Plus Cartridge Bevel Type | |
---|---|
Select the desired Bevel Type from the Current Bevel Type dropdown control. Below is a list of support documentation for editing the configurations of the 45 Plus Degree Bevel Cartridge on the 45 Plus Degree Tab. | Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control |
Select this topic to see information on editing the configurations for the 45 Degree Plus Opening, including:
|
Select this topic to see information on editing the configurations for the 45 Degree Plus Drop, including:
|
Select this topic to see information on editing the configurations for the 45 Degree Plus Outside, including:
|
Select this topic to see information on editing the configurations for the 45 Degree Plus V-Groove.
|
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |