This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


90 Degree Configurations: FrameShop Configurations Screen

90 Degree Cartridge

90 Degree Cartridge

The 90 Degree Cartridge cuts into the matboard at 90° and leaves no bevel. 

90° Degree Bevel Opening and Cartridges

Select the 90 Degree Cartridge Bevel Type

Select the 90 Degree Cartridge Bevel Type

Select the desired Bevel Type from the Current Bevel Type dropdown control.

Below is a list of support documentation for editing the configurations of the 90 Degree Bevel Cartridge on the 90 Degree Tab.

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Select this topic to see information on editing the configurations for the 90 Degree Opening, including:

  • Normal Bevel

  • Normal Bevel-Front of Mat

Select this topic to see information on editing the configurations for the 90 Degree Drop, including:

  • Normal Drop

  • Normal Drop-Front of Mat

Select this topic to see information on editing the configurations for the 90 Degree Outside, including:

  • Outside

  • Outside-Front of Mat

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.