This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

45 Degree Configurations: FrameShop Configurations Screen

Owned by dani.simmonds
Last updated: Jan 17, 2022
2 min read

45 Degree Cartridge

45 Degree Cartridge

The 45 Degree Cartridge cuts a 45° bevel into the matboard.   

45° Degree Bevel Opening and Cartridges

Select the 45 Degree Cartridge Bevel Type

Select the 45 Degree Cartridge Bevel Type

Select the desired Bevel Type from the Current Bevel Type dropdown control.

Below is a list of support documentation for editing the configurations of the 45 Degree Bevel Cartridge on the 45 Degree Tab.

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Configurations for the 45 Degree Opening

Configurations for the 45 Degree Opening

Select this topic to see information on editing the configurations for the 45 Degree Opening, including:

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Configurations for the 45 Degree Drop

Configurations for the 45 Degree Drop

Select this topic to see information on editing the configurations for the 45 Degree Drop, including:

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat,

  • Reverse Drop-Front of Mat

Configurations for the 45 Degree Outside

Configurations for the 45 Degree Outside

Select this topic to see information on editing the configurations for the 45 Degree Outside, including:

  • Outside

  • Outside-Front of Mat

Configurations for the 45 Degree V-Groove

Configurations for the 45 Degree V-Groove

Select this topic to see information on editing the configurations for the 45 Degree V-Groove.

  • V-Groove

Troubleshooting Button

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.