This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
52 Degree Configurations: FrameShop Configurations Screen
- dani.simmonds
52 Degree Cartridge | |
|---|---|
The 52 Degree Cartridge cuts a 52° bevel into the matboard. |  52° Degree Bevel Opening and Cartridges |
Select the 52 Degree Cartridge Bevel Type | |
|---|---|
Select the desired Bevel Type from the Current Bevel Type dropdown control. Below is a list of support documentation for editing the configurations of the 52 Degree Bevel Cartridge on the 52 Degree Tab. |  Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control |
Select this topic to see information on editing the configurations for the 52 Degree Opening, including:
| |
Select this topic to see information on editing the configurations for the 52 Degree Drop, including:
| |
Select this topic to see information on editing the configurations for the 52 Degree Outside, including:
| |
Select this topic to see information on editing the configurations for the 52 Degree V-Groove.
| |
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. | |