Emergency Stop Button

Connections:

• The Emergency Stop Button is usually located on the Control Panel on the left side of the Board for CMCs that include this feature.

• The ECU/Driver Pack is plugged into the back of the Emergency Stop Button or into the Control Panel.

Controlled by:

• The Emergency Stop Button is controlled by the Control Panel and the ECU/Driver Pack.

Troubleshooting:

• It will not cut after Aborting a Cut.

  • Pull out the Emergency Stop Button and Align the Head again.

  • Check the ECU/Driver Pack connections into the back of the Emergency Stop Button/Control Panel, Gantry and the Computer and make sure they are plugged in tight.

  • Turn off the ECU/Driver Pack close the software. Turn on the ECU/Driver Pack restart the software.

• It will not Abort a Cut.

  • Check the ECU/Driver Pack connections into the back of the Emergency Stop Button/Control Panel, Gantry and the Computer and make sure they are plugged in tight.

  • Turn off the ECU/Driver Pack close the software. Turn on the ECU/Driver Pack restart the software.