/
Head Wheel

Head Wheel

Owned by dani.simmonds
Last updated: Oct 09, 2024
1 min read

  • The Head is attached to the Gantry via the Head Grabber Arm which moves vertically on the Gantry via the Gantry Vertical Belt.

  • The Head Wheels are spring-loaded and roll along the grooves in the Gantry.

  • If the Head Wheels are loose, the Head will wobble while cutting and make a bad cut.

Connections:

  • The Head Wheels are spring-loaded and roll along the grooves in the Gantry.

Troubleshooting:

See:

Adjusting the Head Wheels
GraspHeadZ1UP2024800.png
Make Sure There is no Wobbly Movement of the Head on the Gantry

Related content

Head Grabber Arm
Head Grabber Arm
Knowledge Base
More like this
Head Wheel Adjustment: All Current CMC Models Except the Z1
Head Wheel Adjustment: All Current CMC Models Except the Z1
Knowledge Base
More like this
Head
Head
Knowledge Base
More like this
Head Wheel Adjustment: CMC Z1
Head Wheel Adjustment: CMC Z1
Knowledge Base
More like this
Vertical Belt
Vertical Belt
Knowledge Base
More like this
Head Attachment: CMC 5000
Head Attachment: CMC 5000
Knowledge Base
More like this