/
Vertical Belt

Vertical Belt

  • The Vertical Belt sits within the Gantry and controls the motion of the Head to ensure precise control of the Head’s Vertical movement.

    • The Vertical Belt is located behind the Gantry Cover on some models.

Connections:

  • The Gantry moves Horizontally across the Board via the Drive Belt, and the Head moves Vertically along the Gantry via the Vertical Belt.

  • The Head is attached to the Gantry via the Head Grabber Arm which moves vertically on the Gantry via the Vertical Belt.

  • As the Gantry moves horizontally, the Head moves vertically via the Vertical Belt and the Footblock rotates to apply the Cartridge to the matboard.

VerticalBeltPulley800.png
The Vertical Belt on the Gantry
GantryCoverHeadOnZ1HeadUPNoArrows800.png
The Gantry and Head on the Board with Gantry Cover on

Troubleshooting

Related Links

Related Links