This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
45 Degree Opening Configurations: FrameShop Configurations Screen
45 Degree Openings | |
---|---|
The 45 Degree Cartridge cuts the opening with a 45° bevel. | 45° Degree Bevel Opening and Cartridges |
Select the 45 Degree Opening Bevel Type | |
---|---|
Select the 45° Tab on the Configurations screen. Select the specific Opening bevel type from the Current Bevel Type dropdown control:
| Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control |
Select the Area of Concern for 45 Degree Openings Below:Â |
---|
This is viewed as it cut on the machine, i.e., from the back if cutting from the back, or from the front if cutting from the front. Select this topic to adjust the Horizontal Home. |
This is viewed as it cut on the machine, i.e., from the back if cutting from the back, or from the front if cutting from the front. Select this topic to adjust the Vertical Home. |
Select this topic to adjust the Depth Bias. |
Select this topic to adjust the Plunge Count. |
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals. |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. |
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. |
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. |
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. |
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. |
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. |
This is viewed from the front of the mat. Select this topic to adjust the Rotation. |
This is viewed from the front of the mat. Select this topic to adjust the Rotation. |
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. |
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. |
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |