45 Degree Drop Configurations: FrameShop Configurations Screen

Owned by dani.simmonds
Last updated: Jan 18, 2022
5 min read

45 Degree Drops

45 Degree Drops

The 45 Degree Cartridge cuts the drop with a 45° bevel.  

45° Degree Bevel Drop and Cartridges

Select the 45 Degree Drop Bevel Type

Select the 45 Degree Drop Bevel Type

Select the 45° Tab on the Configurations screen. 

Select the specific Drop bevel type from the Current Bevel Type dropdown control.

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat,

  • Reverse Drop-Front of Mat

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Select the Area of Concern for 45 Degree Drops Below: 

Select the Area of Concern for 45 Degree Drops Below: 

45 Degree Drop Cuts the Wrong Depth When Using a SKU

45 Degree Drop Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

45 Degree Drop Does Not Pause for Blade Change when Cutting

45 Degree Drop Does Not Pause for Blade Change when Cutting

Select this topic to adjust the Plunge Count.

45 Degree Circle/Oval Opening Rotation Adjustments Using the Circle/Oval Rotation Utility

45 Degree Circle/Oval Opening Rotation Adjustments Using the Circle/Oval Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

45 Degree Drop Exterior Backup is too Long

45 Degree Drop Exterior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

45 Degree Drop Exterior Backup is too Short

45 Degree Drop Exterior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

45 Degree Drop Exterior Overcut is too Long

45 Degree Drop Exterior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

45 Degree Drop Exterior Overcut is too Short

45 Degree Drop Exterior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

45 Degree Drop Interior Backup is too Long

45 Degree Drop Interior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

45 Degree Drop Interior Backup is too Short

45 Degree Drop Interior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

45 Degree Drop Interior Overcut is too Long

45 Degree Drop Interior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

45 Degree Drop Interior Overcut is too Short

45 Degree Drop Interior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

45 Degree Drop Cuts the Wrong Size

45 Degree Drop Cuts the Wrong Size

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

45 Degree Drop has a Swoop

45 Degree Drop has a Swoop

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

45 Degree Drop has a Flare

45 Degree Drop has a Flare

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

45 Degree Oval Drop has a Bump

45 Degree Oval Drop has a Bump

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

45 Degree Oval Drop has a Feather

45 Degree Oval Drop has a Feather

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

Troubleshooting Button 

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.Â