45 Degree Front Normal Bevel Opening

The 45° Front Normal Bevel Opening is created by cutting into the front of the matboard surface with the blade angled at 45°, thereby slanting the bevel away from the matboard surface, displaying the matboard core from the front.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Copper 45° Front Blade Cartridge is labeled “45°” with a 45° Angle Symbol and a Triangle Symbol on the Cartridge end.

The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.

Select Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.