This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

52 Degree V-Groove Configurations: FrameShop Configurations Screen

Owned by dani.simmonds
Last updated: Jan 18, 2022
6 min read

52 Degree V-Groove

52 Degree V-Groove

The 52 Degree Cartridge cuts the V-Groove with a 52° bevel. 

52° Degree Bevel V-Groove and Cartridges

Select the 52 Degree V-Groove Bevel Type

Select the 52 Degree V-Groove Bevel Type

Select the 52° Tab on the Configurations screen.

Select V-Groove from the Current Bevel Type dropdown control.

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Select the Area of Concern for 52 Degree V-Grooves Below:

Select the Area of Concern for 52 Degree V-Grooves Below:

52 Degree V-Groove Cuts in the Wrong Place Horizontally

52 Degree V-Groove Cuts in the Wrong Place Horizontally

This is viewed from the front of the mat. Select this topic to adjust the Horizontal Home.

52 Degree V-Groove Cuts in the Wrong Place Vertically

52 Degree V-Groove Cuts in the Wrong Place Vertically

This is viewed from the front of the mat. Select this topic to adjust the Vertical Home.

52 Degree V-Groove Cuts the Wrong Depth When Using a SKU

52 Degree V-Groove Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

52 Degree V-Groove Does Not Pause for Blade Change when Cutting

52 Degree V-Groove Does Not Pause for Blade Change when Cutting

Select this topic to adjust the Plunge Count.

52 Degree Circle/Oval V-Groove Rotation Adjustments Using the Circle/Oval Rotation Utility

52 Degree Circle/Oval V-Groove Rotation Adjustments Using the Circle/Oval Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

52 Degree V-Groove Exterior Backup is too Long

52 Degree V-Groove Exterior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

52 Degree V-Groove Exterior Backup is too Short

52 Degree V-Groove Exterior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

52 Degree V-Groove Exterior Overcut is too Long

52 Degree V-Groove Exterior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

52 Degree V-Groove Exterior Overcut is too Short

52 Degree V-Groove Exterior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

52 Degree V-Groove Interior Backup is too Long

52 Degree V-Groove Interior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

52 Degree V-Groove Interior Backup is too Short

52 Degree V-Groove Interior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

52 Degree V-Groove Interior Overcut is too Long

52 Degree V-Groove Interior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

52 Degree V-Groove Interior Overcut is too Short

52 Degree V-Groove Interior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

52 Degree V-Groove Cuts the Wrong Size

52 Degree V-Groove Cuts the Wrong Size

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

52 Degree V-Groove Cuts too Thin 

52 Degree V-Groove Cuts too Thin 

This is viewed from the front of the mat. Select this topic to adjust the Width Adjustment.

52 Degree V-Groove Cuts too Wide 

52 Degree V-Groove Cuts too Wide 

This is viewed from the front of the mat. Select this topic to adjust the Width Adjustment.

52 Degree V-Groove has an Outside Swoop 

52 Degree V-Groove has an Outside Swoop 

This is viewed from the front of the mat. Select this topic to adjust the Outside Rotation.

52 Degree V-Groove has an Outside Flare

52 Degree V-Groove has an Outside Flare

This is viewed from the front of the mat. Select this topic to adjust the Outside Rotation.

52 Degree V-Groove has an Inside Swoop 

52 Degree V-Groove has an Inside Swoop 

This is viewed from the front of the mat. Select this topic to adjust the Inside Rotation.

52 Degree V-Groove has an Inside Flare 

52 Degree V-Groove has an Inside Flare 

This is viewed from the front of the mat. Select this topic to adjust the Inside Rotation.

52 Degree Oval V-Groove has an Outside Bump

52 Degree Oval V-Groove has an Outside Bump

This is viewed from the front of the mat. Select this topic to adjust the Outside Oval Rotation.

52 Degree Oval V-Groove has an Outside Feather 

52 Degree Oval V-Groove has an Outside Feather 

This is viewed from the front of the mat. Select this topic to adjust the Outside Oval Rotation.

52 Degree Oval V-Groove has an Inside Bump 

52 Degree Oval V-Groove has an Inside Bump 

This is viewed from the front of the mat. Select this topic to adjust the Inside Oval Rotation.

52 Degree Oval V-Groove has an Inside Feather 

52 Degree Oval V-Groove has an Inside Feather 

This is viewed from the front of the mat. Select this topic to adjust the Inside Oval Rotation.

Troubleshooting Button 

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

Â