Editing the 52 Degree Cartridge Configurations
Editing the 52 Degree Blade Cartridge Configurations | |
---|---|
| 52 Degree Blade Cartridge and Mat Sample |
| Click the Configurations Button to Open the Configurations Screen |
Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cut Preview.
If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. |
|