Change to the 52 Degree Cartridge

Change to the 52 Degree Blade Cartridge

Change to the 52 Degree Blade Cartridge

  • The 52° Cartridge cuts the Bevel Angle on the matboard at 52°.

  • The Purple 52° Blade Cartridge is labeled “52” with a 52° Angle Symbol on the Cartridge end.

End52Cartridge70800.png
52° Blade Cartridge End
  • Your hardware may look different than the model pictured, but the process is still the same.

  • Push blade cartridge release down to eject the current blade cartridge.

Push the Blade Cartridge Release Lever Down to Eject the Current Cartridge
  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head.

  • It should click into place.

    • It can only be inserted one way.

Turn Cartridge Over and Reinsert into the Head