Check out our new How To section at: How To...

52 Degree Cartridge: CMC 9000 and Z Series

Owned by dani.simmonds
Last updated: Jun 07, 2024
2 min read

52° Blade Cartridge: Cartridge Manual: CMC 9000 and Z Series

52° Blade Cartridge: Cartridge Manual: CMC 9000 and Z Series

  • The 52° plastic purple blade cartridge is designed to cut 52° bevels on standard 4-ply matboard.

The 52° Cartridge cuts the matboard surface with the blade angled at 52°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

52° Bevel Opening and Cartridge
52° Cartridge Configurations

See: 52 Degree Normal Bevel Opening Definition

See: 52 Degree Reverse Bevel Opening Definition

See: 52 Degree Normal Bevel Drop Definition

See: 52 Degree Reverse Bevel Drop Definition

See: 52 Degree Outside Definition

See: 52 Degree Normal Bevel Closed V-Groove Definition

See: 52 Degree Normal Bevel Open V-Groove Definition

See: 52 Degree Reverse Bevel Open V-Groove Definition

Contents:

Â