45 Degree Plus Cartridge: CMC 8000+, 9000 and Z Series

45°+ Blade Cartridge: Cartridge Manual: CMC 9000, Z Series and 8000+

45°+ Blade Cartridge: Cartridge Manual: CMC 9000, Z Series and 8000+

The 45°+ metal black blade cartridge is designed to cut 45° bevels on thicker matboard, such as 8-ply matboard.
The 45°+ metal black blade cartridge is labeled 45°+ on the end.

The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°.

This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

45°+ Normal Bevel Opening and Cartridge

45°+ Cartridge Configurations

See: 45 Degree Plus Normal Bevel Opening Definition

See: 45 Degree Plus Reverse Bevel Opening Definition

See: 45 Degree Plus Normal Bevel Drop Definition

See: 45 Degree Plus Reverse Bevel Drop Definition

See: 45 Degree Plus Outside Definition

See: 45 Degree Plus Normal Bevel Closed V-Groove Definition

See: 45 Degree Plus Normal Bevel Open V-Groove Definition

See: 45 Degree Plus Reverse Bevel Open V-Groove Definition