Check out our new How To section at: How To...

Change to the 90 Degree Cartridge

Owned by dani.simmonds
Last updated: May 14, 2024
1 min read

Change to the 90 Degree Blade Cartridge

Change to the 90 Degree Blade Cartridge

  • The 90° plastic green blade cartridge is designed to cut 90° bevels on standard 4-ply matboard.

  • The 90° plastic green blade cartridge is labeled 90° on the end.

90 Degree Blade Cartridge Icon

  • Push blade cartridge release down to eject the current blade cartridge.

Push the Blade Cartridge Release Lever Down to Eject the Current Cartridge

  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head.

  • It should click into place.

    • It can only be inserted one way.

Â