90 Degree Outside Configurations: FrameShop Configurations Screen

Owned by dani.simmonds
Last updated: Jan 18, 2022
5 min read

90 Degree Outside

90 Degree Outside

The 90 Degree Cartridge cuts the outside with a 90° cut and leaves no bevel. 

90° Degree Bevel Outside and Cartridges

Select the 90 Degree Outside Bevel Type

Select the 90 Degree Outside Bevel Type

Select the 90° Tab on the Configurations screen.

Select the specific Outside bevel type from the Current Bevel Type dropdown control. 

Bevel displayed for clarity - the 90° Cartridge cuts with no bevel displayed.

  • Outside

  • Outside-Front of Mat

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Select the Area of Concern for the 90 Degree Outside Cut Below:

Select the Area of Concern for the 90 Degree Outside Cut Below:

90 Degree Outside Cuts the Wrong Depth When Using a SKU

90 Degree Outside Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

90 Degree Outside Does Not Pause for Blade Change when Cutting

90 Degree Outside Does Not Pause for Blade Change when Cutting

Select this topic to adjust the Plunge Count.

90 Degree Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility

90 Degree Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

90 Degree Outside Exterior Backup is too Long

90 Degree Outside Exterior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. Bevel is shown for clarity of blade movement.

90 Degree Outside Exterior Backup is too Short

90 Degree Outside Exterior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. Bevel is shown for clarity of blade movement.

90 Degree Outside Exterior Overcut is too Long

90 Degree Outside Exterior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. Bevel is shown for clarity of blade movement.

90 Degree Outside Exterior Overcut is too Short

90 Degree Outside Exterior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. Bevel is shown for clarity of blade movement.

90 Degree Outside Interior Backup is too Long

90 Degree Outside Interior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. Bevel is shown for clarity of blade movement.

90 Degree Outside Interior Backup is too Short

90 Degree Outside Interior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. Bevel is shown for clarity of blade movement.

90 Degree Outside Interior Overcut is too Long

90 Degree Outside Interior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. Bevel is shown for clarity of blade movement.

90 Degree Outside Interior Overcut is too Short

90 Degree Outside Interior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. Bevel is shown for clarity of blade movement.

90 Degree Outside Cuts the Wrong Size 

90 Degree Outside Cuts the Wrong Size 

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

90 Degree Outside has a Swoop 

90 Degree Outside has a Swoop 

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

90 Degree Outside has a Flare 

90 Degree Outside has a Flare 

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

 

90 Degree Oval Outside has a Bump 

90 Degree Oval Outside has a Bump 

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

90 Degree Oval Outside has a Feather

90 Degree Oval Outside has a Feather

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

Troubleshooting Button 

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.