This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Opening Adjustment on the Outside: FrameShop Configurations Screen
Opening Adjustment for the Outside | |
|---|---|
Adjust the Opening Adjustment if the outside is cutting the wrong size. |  Opening Adjustment Controls the Width of the Outside |
Current Outside Bevel Type | |
|---|---|
Select the desired Cartridge Tab and then the bevel type you want to edit from the Current Bevel Type dropdown control before making adjustments. Select Current Bevel Type-Front of Mat if it is being cut from the front of the mat.
|  Select the Desired Bevel Type From the Bevel Type Dropdown Control |
Outside Size too Big | |
|---|---|
The outside is cutting too big. |  Outside Size is Cut too Big |
Decrease the Opening Adjustment. |  Decrease the Opening Adjustment |
The object will now be the correct size. |  Test Cut and Adjust Until the Outside is the Correct Size |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. |  Test Cut and Adjust Until the Outside is the Correct Size |
Outside Size too Small | |
|---|---|
The outside is cutting too small. |  Outside Size is Cut too Small |
Increase the Opening Adjustment. |  Increase the Opening Adjustment |
The object will now be the correct size. | Test Cut and Adjust Until the Outside is the Correct Size |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. | Test Cut and Adjust Until the Outside is the Correct Size |