This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


90 Degree Drop Configurations: FrameShop Configurations Screen

90 Degree Drop

90 Degree Drop

The 90 Degree Cartridge cuts the drop with a 90° cut and leaves no bevel. 

90° Degree Bevel Drop and Cartridges

Select the 90 Degree Drop Bevel Type

Select the 90 Degree Drop Bevel Type

Select the 90° Tab on the Configurations screen.

Select the specific Drop bevel type from the Current Bevel Type dropdown control. 

Bevel displayed for clarity - the 90° Cartridge cuts with no bevel displayed.

  • Normal Drop

  • Normal Drop-Front of Mat

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Select the Area of Concern for 90 Degree Drops Below:

Select the Area of Concern for 90 Degree Drops Below:

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. Bevel is shown for clarity of blade movement.

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

 

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.