This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
45 Degree Plus Drop Configurations: FrameShop Configurations Screen
- dani.simmonds
45 Degree Plus Drop | |
|---|---|
The 45 Degree Plus Cartridge* cuts the drop with a 45° bevel on thicker matboard such as 8-ply. *Older systems may have a yellow plastic 45°+ Cartridge. |  45°+ Degree Plus Bevel Drop and Cartridges |
Select the 45 Degree Plus Drop Bevel Type | |
|---|---|
Select the 45°+ Tab on the Configurations screen. Select the specific Drop bevel type from the Current Bevel Type dropdown control.
|  Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control |
Select the Area of Concern for 45 Degree Plus Drops Below: |
|---|
Select this topic to adjust the Depth Bias. |  The Depth Bias Field is Used to Calculate the Proper Blade Depth when the SKU Selected for the Matboard Contains the Matboard Thickness |
Select this topic to adjust the Plunge Count. |  The Plunge Count Field Adjusts the Number of Plunges When to Pause the Cutting to Change the Blade |
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals. |  The Circle/Oval Rotation Utility Adjusts the Oval Rotation to Correct for Feathers and Bumps in Oval Openings |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. |  Decrease the Exterior Backup if the Exterior Backup of the Non-Oval Drop is Too Long |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup. |  Increase the Exterior Backup if the Exterior Backup of the Non-Oval Drop is Cut Too Short |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. |  Decrease the Exterior Overcut if the Exterior Overcut of the Non-Oval Drop is Cut too Long |
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut. |  Increase the Exterior Overcut if the Exterior Overcut of the Non-Oval Drop is Cut Too Short |
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. |  Decrease the Interior Backup if the Interior Backup of the Non-Oval Drop is Cut Too Long |
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup. |  Increase the Interior Backup if the Interior Backup of the Non-Oval Drop is Cut Too Short |
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. |  Decrease the Interior Overcut if the Interior Overcut of the Non-Oval Drop is Cut Too Long |
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut. |  Increase the Interior Overcut if the Interior Overcut of the Non-Oval Drop is Cut Too Short |
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. |  Adjust the Opening Adjustment if the Drop is Cut the Wrong Size |
This is viewed from the front of the mat. Select this topic to adjust the Rotation. |  Adjust the Rotation to Correct for Swoops in Non-Oval Drops |
This is viewed from the front of the mat. Select this topic to adjust the Rotation. |  Adjust the Rotation to Correct for Flares in Non-Oval Drops |
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. |  Adjust the Oval Rotation to Correct for Bumps in Oval Drops |
This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation. |  Adjust the Oval Rotation to Correct for Feathers in Oval Drops |
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |  Click the Troubleshooting to Open the Troubleshooting Utility to Make Quick Configuration Edits to the Current Drop |