This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

52 Degree Outside Configurations: FrameShop Configurations Screen

Owned by dani.simmonds
Last updated: Jan 18, 2022
5 min read

52 Degree Outside

52 Degree Outside

The 52 Degree Cartridge cuts the outside with a 52° bevel. 

52° Degree Bevel Outside and Cartridges

Select the 52 Degree Outside Bevel Type

Select the 52 Degree Outside Bevel Type

Select the 52° Tab on the Configurations screen.

Select the specific Outside bevel type from the Current Bevel Type dropdown control.

  • Outside

  • Outside-Front of Mat

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Select the Area of Concern for the 52 Degree Outside Cut Below:

Select the Area of Concern for the 52 Degree Outside Cut Below:

52 Degree Outside Cuts the Wrong Depth When Using a SKU

52 Degree Outside Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

52 Degree Outside Does Not Pause for Blade Change when Cutting

52 Degree Outside Does Not Pause for Blade Change when Cutting

Select this topic to adjust the Plunge Count.

52 Degree Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility

52 Degree Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

52 Degree Outside Exterior Backup is too Long

52 Degree Outside Exterior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

52 Degree Outside Exterior Backup is too Short

52 Degree Outside Exterior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

52 Degree Outside Exterior Overcut is too Long

52 Degree Outside Exterior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

52 Degree Outside Exterior Overcut is too Short

52 Degree Outside Exterior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

52 Degree Outside Interior Backup is too Long

52 Degree Outside Interior Backup is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

52 Degree Outside Interior Backup is too Short

52 Degree Outside Interior Backup is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

52 Degree Outside Interior Overcut is too Long

52 Degree Outside Interior Overcut is too Long

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

52 Degree Outside Interior Overcut is too Short

52 Degree Outside Interior Overcut is too Short

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

52 Degree Outside Cuts the Wrong Size

52 Degree Outside Cuts the Wrong Size

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

52 Degree Outside has a Swoop 

52 Degree Outside has a Swoop 

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

52 Degree Outside has a Flare

52 Degree Outside has a Flare

This is viewed from the front of the mat. Select this topic to adjust the Rotation.

52 Degree Oval Outside has a Bump

52 Degree Oval Outside has a Bump

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

52 Degree Oval Outside has a Feather 

52 Degree Oval Outside has a Feather 

This is viewed from the front of the mat. Select this topic to adjust the Oval Rotation.

Troubleshooting Button 

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.