Cartridge Type Examples

Cartridge Type Examples
The examples below display the different Cartridges that can be selected from the Cartridge Type Tabs. Cartridge Definition A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.
45 Degree Cartridge The 45 Degree Cartridge cuts a 45° bevel into the matboard. 45 Degree Cartridge Full Definition The 45° Cartridge cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Normal Bevel Opening Definition See: /wiki/spaces/FrameShop8x/pages/1948975198 See: 45 Degree Normal Bevel Drop Definition See: 45 Degree Reverse Bevel Drop Definition See: 45 Degree Outside Definition See: 45 Degree Normal Bevel Closed V-Groove Definition See: 45 Degree Normal Bevel Open V-Groove Definition See: 45 Degree Reverse Bevel Open V-Groove Definition Bevel Type Definition The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
45 Degree+ Cartridge The 45°+ Cartridge (45° Plus Cartridge) cuts a 45° bevel into thicker matboard such as 8-ply. 45 Degree Plus Cartridge Full Definition The 45°+ Cartridge cuts the bevel angle on the thicker matboard at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Plus Normal Bevel Opening Definition See: 45 Degree Plus Reverse Bevel Opening Definition See: 45 Degree Plus Normal Bevel Drop Definition See: 45 Degree Plus Reverse Bevel Drop Definition See: 45 Degree Plus Outside Definition See: 45 Degree Plus Normal Bevel Closed V-Groove Definition See: 45 Degree Plus Normal Bevel Open V-Groove Definition See: 45 Degree Plus Reverse Bevel Open V-Groove Definition Bevel Type Definition The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
45 Degree Front Cartridge The 45° Front Cartridge cuts a 45° bevel into the matboard from the front of the mat. 45 Degree Front Cartridge Full Definition The 45° Front Cartridge cuts the front of the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Front Normal Bevel Opening Definition See: 45 Degree Front Reverse Bevel Opening Definition See: 45 Degree Front Normal Bevel Drop Definition See: 45 Degree Front Reverse Bevel Drop Definition See: 45 Degree Front Outside Definition See: 45 Degree Front Normal Bevel Closed V-Groove Definition See: 45 Degree Front Normal Bevel Open V-Groove Definition See: 45 Degree Front Reverse Bevel Open V-Groove Definition Bevel Type Definition The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
52 Degree Cartridge The 52 Degree Cartridge cuts a 52° bevel into the matboard. 52 Degree Cartridge Full Definition The 52° Cartridge cuts the matboard surface with the blade angled at 52°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 52 Degree Normal Bevel Opening Definition See: 52 Degree Reverse Bevel Opening Definition See: 52 Degree Normal Bevel Drop Definition See: 52 Degree Reverse Bevel Drop Definition See: 52 Degree Outside Definition See: 52 Degree Normal Bevel Closed V-Groove Definition See: /wiki/spaces/FrameShop8x/pages/1948844274 See: 52 Degree Reverse Bevel Open V-Groove Definition Bevel Type Definition The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
90 Degree Cartridge The 90 Degree Cartridge cuts a 90° opening into the matboard, displaying no bevel. 90 Degree Cartridge Full Definition The 90° Cartridge cuts a 90° Right Angle into the matboard. The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type for the 90° openings is the form of opening cut and determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 90 Degree Bevel Opening Definition See: 90 Degree Bevel Drop Definition See: 90 Degree Outside Definition See: 90 Degree Bevel Open V-Groove Definition Bevel Type Definition The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
Deboss Cartridges The Deboss Cartridges press into the matboard to create a subtle design. Deboss Cartridge General Definition The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design. There are three Deboss stylus sizes: Wide, Medium, Thin. In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs. See: Add Deboss Opening Function See: Deboss Configurations See: Deboss Thin Definition See: Deboss Medium Definition See: Deboss Wide Definition
Pen Cartridge The Pen Cartridge holds a pen to the matboard to draw onto the matboard. Pen Definition The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design. You can Pen Designs, CutArts, LetterMats and TTFs. See: Pen Cartridge Configurations
Vinyl Cartridge The Vinyl Cartridge cuts designs into a sheet of Vinyl which has been temporarily adhered to the matboard. Vinyl Definition The Vinyl Cartridge uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design. See: Vinyl Cartridge Configurations
Crease Cartridge The Crease Cartridge perforates the material to make folding it easier when making Boxes. Crease Definition The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box. See: Add Crease Opening Function See: Crease Cartridge Configurations

Bevel Type Examples
For Additional Information: See Bevel Type Examples for examples of the different bevel types that the bladed cartridges can cut. Bevel Type Definition The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Cartridge Type Examples

Bevel Type Examples