45 Degree Front Reverse Bevel Open V-Groove

The 45° Front Reverse Bevel Open V-Groove involves two symmetrical cuts from the front: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart.

The matboard core is not visible but the lower layer matboard surface is visible from the front.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop.

• Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening.

  • The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

  • However, it cannot be chosen as a standalone bevel type within the Design Editor.

The Copper 45° Front Blade Cartridge is labeled “45°” with a 45° Angle Symbol and a Triangle Symbol on the Cartridge end.

The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.

Select Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.