45 Degree Front Cartridge

The 45° Front Cartridge cuts the Bevel Angle on the matboard from the Front at 45°.

This Bevel Angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Bevel Type determines the initial blade plunge position.

The Copper 45° Front Blade Cartridge is labeled “45°” with a 45° Angle Symbol and a Triangle Symbol on the Cartridge end.

The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.