45 Degree Front Reverse Bevel Opening

  • The 45° Front Reverse Bevel Opening is created by cutting into the front of the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface, hiding the matboard core from the front.

    • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

  • The Copper 45° Front Blade Cartridge is labeled “45°” with a 45° Angle Symbol and a Triangle Symbol on the Cartridge end.

  • The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.

  • Select Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

45FrontMetalBevelRBOpeningCartridge70800.png
45° Front Reverse Bevel Opening and Cartridge
End45FrontCartridge70800.png
45° Front Blade Cartridge End