90 Degree Bevel Open V-Groove

The 90° Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart.

The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle, but the lower layer matboard surface is visible from the front.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• First Cut: Cuts the Interior cut into the Fallout Clockwise: 90 Degree Bevel Drop.

  Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: 90 Degree Bevel Opening.

  • The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

  • However, it cannot be chosen as a standalone bevel type within the Design Editor.

The Green 90° Blade Cartridge is labeled “90” with a 90° Angle Symbol on the Cartridge end.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.