90 Degree Bevel Opening

The 90° Bevel Opening is created by cutting a 90° Right Angle into the matboard.

The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Green 90° Blade Cartridge is labeled “90” with a 90° Angle Symbol on the Cartridge end.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.