52 Degree Reverse Bevel Opening

  • The 52° Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 52°, thereby slanting the bevel under the matboard surface.

  • The matboard core is not visible from the front.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

  • Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

52RBBevelOpeningCartridge70800.png
52° Reverse Bevel Opening and Cartridge