45 Degree Reverse Bevel Opening

The 45° Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface, hiding the matboard core from the front.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Black 45° Blade Cartridge is labeled “45” with a 45° Angle Symbol on the Cartridge end.

The 45° Blade Cartridge does not support Blade Depths above 16.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type Dropdown Control to edit this configuration.