This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


45 Degree V-Groove Configurations: FrameShop Configurations Screen

45 Degree V-Groove

45 Degree V-Groove

The 45 Degree Cartridge cuts the V-Groove with a 45° bevel or 52° bevel. Select the desired Cartridge before selecting the V-Groove from the Bevel Type Dropdown Control. 

45° Degree Bevel V-Groove and Cartridges

Select the 45 Degree V-Groove

Select the 45 Degree V-Groove

Select the 45° Tab on the Configurations screen. 

Select V-Groove from the Current Bevel Type dropdown control.

Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control

Select the Area of Concern for 45 Degree V-Grooves Below:

Select the Area of Concern for 45 Degree V-Grooves Below:

This is viewed from the front of the mat. Select this topic to adjust the Vertical Home.

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment.

This is viewed from the front of the mat. Select this topic to adjust the Width Adjustment.

This is viewed from the front of the mat. Select this topic to adjust the Width Adjustment.

This is viewed from the front of the mat. Select this topic to adjust the Outside Rotation.

This is viewed from the front of the mat. Select this topic to adjust the Outside Rotation.

This is viewed from the front of the mat. Select this topic to adjust the Inside Rotation.

This is viewed from the front of the mat. Select this topic to adjust the Inside Rotation.

Adjust the Outside Oval Rotation to Correct for Bumps in the Outside Cut of Oval V-Grooves

This is viewed from the front of the mat. Select this topic to adjust the Outside Oval Rotation.

 

This is viewed from the front of the mat. Select this topic to adjust the Inside Oval Rotation.

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.Â