This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Vinyl Configurations: FrameShop Configurations Screen
- dani.simmonds
Vinyl Cartridge | |
|---|---|
The Vinyl Cartridge cuts designs into sheets of Vinyl which have been temporarily adhered to the matboard. |  Vinyl Design and Cartridge |
Vinyl Tab | |
|---|---|
Select this topic to see information on editing the configurations for the Vinyl Cartridge on the Vinyl Tab. The Vinyl defaults can be defined in the Admin section of the software. Below is a list of support documentation for editing the configurations of the Vinyl Cartridge on the Vinyl Tab. |  Select the Desired Bevel Type to Edit from the Current Bevel Type Dropdown Control |
This is viewed from the front of the mat. Select this topic to see information on editing the Horizontal Adjustment. |  Adjust the Horizontal Home if the Vinyl Object is Applied in the Wrong Place Horizontally |
This is viewed from the front of the mat. Select this topic to see information on editing the Vertical Adjustment. |  Adjust the Vertical Home if the Vinyl Object is Applied in the Wrong Place Vertically |
This is viewed from the front of the mat. Select this topic to see information on editing the Opening Adjustment. |  Adjust the Opening Adjustment if the Vinyl is Applied at the Wrong Size |
Select this topic to see information on editing the Depth Setting. |  Adjust the Depth Setting for the Appropriate Blade Depth Setting for the Pen Cartridge |
Select this topic to see information on editing the Corner Pause. |  Adjust the Corner Pause to Set How Long to Pause in the Corners When Applying the Pen Cartridge |
This is viewed from the front of the mat. Select this topic to see information on editing the Overshoot. |  Decrease the Overshoot if the Vinyl Distance Beyond the Corner is too Long |
This is viewed from the front of the mat. Select this topic to see information on editing the Overshoot. |  Increase the Overshoot if the Vinyl Distance Beyond the Corner is too Short |
Select this topic to see information on editing the Plunge between segments. |  The Plunge Field Controls Whether to Keep the Vinyl Cartridge Plunged in the Corners, or Whether to Retract and Replunge the Vinyl into Each Corner |
Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |  Click the Troubleshooting to Open the Troubleshooting Utility to Make Quick Configuration Edits to the Current Opening |
Set Vinyl Defaults | |
|---|---|
Set up the Vinyl Defaults in the Admin Editor section of the software. |  Set the Desired Vinyl Defaults in the Editor Defaults Section |