Toggles: FrameShop Cut Preview Screen

Use the Toggles section to toggle on/off different functions available on the Cutting Preview screen.

Cut Screen Toggles

There are a variety of functions that can be toggled on or off from the Toggles section of the Cutting Preview.

NOTE: The specific options available are dependent upon the CMC model being used.

NOTE: You may have to set the Cut Preview Screen to full screen to view the rest of the Display Option toggles located at the bottom of the screen.

Cut the Outside Toggle

Select this topic to see information on the Cut the Outside Toggle for the CMC Z1, Z (9000z), 9000, and 8000.

Cut Outside Using the 90 Degree Tool

Select this topic to see information on the 90 Degree Outside Cut for the CMC 9000.

Outside Cut Options

Select this topic to see information on the Outside Cut Options for the CMC Z1 and Z (9000z).

Set Advanced Outside Cut Options

Select this topic to see information on the Set Advanced Options, which also includes cutting the outside setting using the 90 Degree Tool for the CMC Z1 and Z (9000z).

Rotate Mat 90 Degrees

Select this topic to see information on Rotating the Current Mat 90 Degrees Clockwise for the CMC Z1, Z (9000z), 9000, and 8000.

Cut from Front

Select this topic to see information on selecting to Cut from the Front of the mat or Cut from the Back for the CMC Z1, Z (9000z), 9000, and 8000.

Cut Layers Stacked

Select this topic to see information on Cutting and Assembling the Mats while the mats are still in the machine, for the CMC Z1, Z (9000z), 9000, and 8000.

Continuous Layer

Select this topic to see information on Cutting the Current Layer Exclusively without rolling over to the next layer for the CMC Z1, Z (9000z), 9000, and 8000.

Head Travel

Select this topic to see information on Displaying the Motion of the Head as it travels for the CMC Z1, Z (9000z), 9000, and 8000.

NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle.

Plunge Count

Select this topic to see information on automatically Pausing for a Blade Change after the specified number of blade plunges entered on the Configurations screen for the CMC Z1, Z (9000z), 9000, and 8000.

NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle.

Display Current Layer Only

Select this topic to see information on Displaying the Current Layer Only for the CMC Z1, Z (9000z), 9000, and 8000.

NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle.

Clear Cut History

Select this topic to see information on Clearing the Previous Cut History from the Cut Preview screen for the CMC Z1, Z (9000z), 9000, and 8000.