This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Set Advanced Options: FrameShop Cut Preview Screen
Set Advanced Options | |
---|---|
Use the Set Advanced Options to select several setting that dictate how the outside of the mat is cut for the CMC Z1 and Z (9000z). | |
Set Advanced OptionsClick the Set Advanced Options button to access the Set Outside Cut Options screen. | |
Enable Outside CutSelect this topic to see information on setting for Cutting the Outside of the Mat. | |
Cut Outside Using 90 Degree ToolSelect this topic to see information on settings for Cutting the Outside of the Mat Using the 90 Degree Tool. | |
Cut ModeSelect this topic to see information on setting the Cut Mode for cutting the outside of the mat. | |
Cut PatternSelect this topic to see information on setting the Cut Pattern for cutting tiled mats. | |
Remnant TrimmingSelect this topic to see information on setting whether to use Remnant Trimming when cutting the outside of the mat. |