This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Head Travel: FrameShop Cut Preview Screen
Head Travel |
---|
Use the Head Travel toggle to display the motions of the Head that will take place when it cuts the mat for the CMC Z1, Z (9000z), 9000, and 8000. NOTE: You may have to set the Cut Preview Screen to full screen to view this toggle. |
Head Travel Display On | |
---|---|
Click the Head Travel toggle On to display the motions of the Head that will take place when it cuts the mat. | |
Click the Head Travel toggle On. The Head traveling to the first opening is displayed in yellow. The head traveling between the objects are displayed as green lines. The plunges of the blade are numbered so the user can see the cut order. The cut lines are displayed in blue. |
Head Travel Display Off | |
---|---|
Click the Head Travel toggle Off to not display the movements of the Head. | |
Click the Head Travel toggle Off. The Cut Preview does not display the movements of the Head. |