This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Layers and SKUs: FrameShop Cut Preview Screen

Layers and SKUs

Layers and SKUs

The Layers and SKUs section displays the layer numbers and the SKUs assigned to them, if applicable. The matboard color is displayed on the mat thumbnail if it is available.

Select the Layer Thumbnail

Select the Layer Thumbnail

Click on the desired Layer Thumbnail to select it. 

If a SKU is associated with this layer, it will be displayed on the matboard corner sample. 

The matboard color is displayed on the matboard corner sample if it is available.

If the selected SKU contains a thickness value, the blade depth number will be displayed under the SKU number. If the SKU does not contain a thickness value, the default blade depth will be displayed.

Select the Layer Number

Select the Layer Number

Alternatively, click the +/- buttons on the Layer field at the top of the screen to select the desired layer number.  

The current layer description is displayed next to the Blade Depth Quick Select dropdown control; i.e., bottom mat, second mat, top mat, etc. 

Set the Default for the Layer Direction

Set the Default for the Layer Direction

Set the defaults for the Layer Direction in the Admin > Defaults section.

Â